Zanussi ZHRN883K Kullanıcı Kılavuzu - Sayfa 14
Hob Zanussi ZHRN883K için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Zanussi ZHRN883K 16 sayfaları.
Sayfayı Yazdır
Problem
and a number come on.
You can hear a constant beep
noise.
comes on.
8.2 If you cannot find a solution...
If you cannot find a solution to the problem
yourself, contact your dealer or an
Authorised Service Centre. Give the data
from the rating plate. Give also three digit
letter code for the glass ceramic (it is in the
corner of the glass surface) and an error
9. TECHNICAL DATA
9.1 Rating plate
Model ZHRN883K
Typ 60 HBD 47 AO
Ser.Nr. .................
ZANUSSI
9.2 Cooking zones specification
Cooking zone
Left front
Left rear
Right front
Right rear
For optimal cooking results use cookware no
larger than the diameter of the cooking zone.
14
ENGLISH
Possible cause
There is an error in the hob.
The electrical connection is incor‐
rect.
The second phase of the power sup‐
ply is missing.
PNC 949 595 706 02
220 - 240 V 50 - 60 Hz
Made in: Germany
7.0 kW
Nominal Power (Max heat set‐
ting) [W]
750 / 2200
1200
1200
1500 / 2400
Remedy
Deactivate the hob and activate it
again after 30 seconds. If
on again, disconnect the hob from the
electrical supply. After 30 seconds,
connect the hob again. If the problem
continues, speak to an Authorised
Service Centre.
Disconnect the hob from the electrical
supply. Ask a qualified electrician to
check the installation.
Check if the hob is correctly connected
to the electrical supply. Remove the
fuse, wait one minute, and insert the
fuse again.
message that comes on. Make sure, you
operated the hob correctly. If not the
servicing by a service technician or dealer
will not be free of charge, also during the
warranty period. The information about
guarantee period and Authorised Service
Centres are in the guarantee booklet.
Cooking zone diameter [mm]
120 / 210
145
145
170 / 265
comes