Zanussi ZIFN844K Kullanıcı Kılavuzu - Sayfa 11

Hob Zanussi ZIFN844K için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Zanussi ZIFN844K 20 sayfaları.
Ayrıca Zanussi ZIFN844K için: Kullanıcı Kılavuzu (21 sayfalar)

Sayfayı Yazdır

To activate the function: touch

comes on for 4 seconds. The Timer stays on.

To deactivate the function: touch

previous heat setting comes on.

When you deactivate the hob,

you also deactivate this function.

5.11 Child Safety Device

This function prevents an accidental

operation of the hob.

To activate the function: activate the hob

with

. Do not set any heat setting. Touch

for 4 seconds.

the hob with

To deactivate the function: activate the hob

with

. Do not set any heat setting. Touch

for 4 seconds.

the hob with

To override the function for only one

cooking time: activate the hob with

comes on. Touch

heat setting in 10 seconds. You can

operate the hob. When you deactivate the

hob with

the function operates again.

5.12 Power management

If multiple zones are active and the

consumed power exceeds the limitation of

the power supply, this function divides the

available power between all cooking zones.

The hob controls heat settings to protect the

fuses of the house installation.

• Cooking zones are grouped according to

the location and number of the phases in

the hob. Each phase has a maximum

electricity loading (3700 W). If the hob

reaches the limit of maximum available

power within one phase, the power of the

cooking zones will be automatically

reduced.

• The heat setting of the cooking zone

selected last is always prioritised. The

remaining power will be divided between

the previously activated cooking zones in

reverse order of selection.

. The

comes on. Deactivate

for 4 seconds. Set the

• The heat setting display of the reduced

zones changes between the initially

selected heat setting and the reduced

heat setting.

• Wait until the display stops flashing or

reduce the heat setting of the cooking

zone selected last. The cooking zones will

continue operating with the reduced heat

setting. Change the heat settings of the

cooking zones manually, if necessary.

Refer to the illustration for possible

combinations in which power can be

distributed among the cooking zones.

5.13 Hob²Hood

It is an advanced automatic function which

connects the hob to a special hood. Both the

hob and the hood have an infrared signal

communicator. Speed of the fan is defined

automatically on basis of mode setting and

temperature of the hottest cookware on the

hob. You can also operate the fan from the

hob manually.

For most of the hoods the

remote system is originally

deactivated. Activate it before

you use the function. For more

information refer to hood user

manual.

Operating the function automatically

To operate the function automatically set the

automatic mode to H1 – H6. The hob is

originally set to H5. The hood reacts

whenever you operate the hob. The hob

recognizes temperature of the cookware

automatically and adjusts the speed of the

fan.

ENGLISH