Zanussi 2222 119-57 ZI 9121 F Talimat Kitapçığı - Sayfa 17

Dondurucu Zanussi 2222 119-57 ZI 9121 F için çevrimiçi göz atın veya pdf Talimat Kitapçığı indirin. Zanussi 2222 119-57 ZI 9121 F 24 sayfaları. Zanussi freezer user manual

Sayfayı Yazdır

Electrical connections

Any electrical work required to install this appliance

should be carried out by a qualified electrician or

competent person.

WARNING: THIS APPLIANCE MUST BE

EARTHED.

The manufacturer declines any liability should

this safety measure not be observed.

If the plug that is fitted to your appliance is not

suitable for your socket outlet, it must be cut off and

the appropriate plug fitted.

Remove the fuse from the cut off plug.

The cut off plug should then be disposed of to

prevent the hazard of shocks in case it should be

plugged into a 13amp socket in another part of your

home.

Important

The wires in the mains lead are coloured in

accordance with the following code:

Green and Yellow

Blue

Brown

If you fit your own plug, the colours of the wires in

the mains lead of your appliance may not

correspond with the markings identifying the

terminals in your plug, proceed as follows:

GREEN & YELLOW

13 AMP. FUSE

BROWN

BLUE

CORD CLAMP

D207

Connect the Green and Yellow (earth) wire to the

terminal in the plug which is marked with the letter

ÇEÈ or the earth symbol

yellow.

Connect the blue (neutral) wire to the terminal in the

plug which is marked with the letter ÇNÈ or coloured

black.

Connect the brown (live) wire to the terminal in the

plug which is marked with the letter ÇLÈ or coloured

red.

The plug moulded onto the lead incorporates a fuse.

- Earth

- Neutral

- Live

or coloured green and

For replacement, use a 13amp BSI362 fuse. Only

ASTA or BSI approved fuses should be used.

The plug must not be used if the fuse cover/carrier is

lost. The cover/carrier is indicated by the coloured

insert at the base of the plug.

A replacement cover/carrier must be obtained from

your local Zanussi Service Force Centre.

This appliance complies with the E.E.C. Directive

No. 87/308 of 2.6.87 relative to radio interference

suppression.

This appliance complies with the following

E.E.C. Directives:

73/23 EEC of 19.2.73 (Low Voltage Directive)

and subsequent modifications;

89/336 EEC of 3.5.89 (Electromagnetic

Compatibility Directive) and subsequent

modifications.

Please ensure that when the appliance is

installed it is easily accessible for the engineer in

the event of a breakdown.