Zanussi DV 35 Kullanım ve Bakım Talimatları - Sayfa 9
Dondurucu Zanussi DV 35 için çevrimiçi göz atın veya pdf Kullanım ve Bakım Talimatları indirin. Zanussi DV 35 32 sayfaları. Freezer
Ayrıca Zanussi DV 35 için: Kullanım ve Bakım Kılavuzu (33 sayfalar), Kullanım ve Bakım Kılavuzu (32 sayfalar)
Sayfayı Yazdır
DOOR REVERSAL
Before carrying out the following instruction
make sure that you:
*
Disconnect the appliance from the mains
supply.
*
Remove all food and store in a cool dry
place.
*
Remove all shelves and other loose items.
1. Gently lay the appliance back, with the top
raised at least 30cm (12") from the floor (use a
stool or something similar). Use a towel or cloth
at the base of the appliance to protect the side
panels and the floor from damage. Do NOT
support the appliance on the rear venitlation grill
(See Fig. 3 for correct positioning).
Remove level adjuster (1) from the small foot
assembly. The small foot (2) can now be
removed by removing the screw (3). In order
to remove the large foot/hinge assembly (7),
screws (4 & 5) should be removed making
sure that spacer (6) is retained with the
assembly (See Fig. 4)
2. Carefully disengage the door from the upper
hinge pin (See Fig. 4).
4. Refit the door, engaging the top with the
upper hinge pin in its new position.
5. Pull out the lower hinge pin (8) which may
have come away with the hinge blade or
remained in the door. Push the pin (rounded end)
into the bush at the bottom of the door on the
side opposite to its original position.
6. Taking care not to press down on the door.
The large foot/hinge assembly should be
transferred over to the opposite side of the
cabinet and screws 4 and 5 moved over to their
new positions in the hinge foot (See Fig. i).
Fig.i
7. It is important that the spacer (6) is retained
with screw (4) in the channel between the base
of the appliance and the foot/hinge assembly
when screwing it into its new position.
8. Refit the small foot, positioning the screw in
the hole furthest from the cabinet front on the
flat portion of the base.
9. Replace the level adjuster (1) in the small foot.
10. Stand the appliance upright.
3. Unscrew the upper hinge pin (9) and transfer
it to the opposite side (See Fig. 5).
7