Zanussi ZBB28441SV Kullanıcı Kılavuzu - Sayfa 11

Dondurucu Zanussi ZBB28441SV için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Zanussi ZBB28441SV 17 sayfaları.
Ayrıca Zanussi ZBB28441SV için: Kullanıcı Kılavuzu (17 sayfalar)

Sayfayı Yazdır

Problem

Water flows on the floor.

The temperature in the appli-

ance is too low/too high.

If the advice does not lead to the

desired result, contact the nearest

Authorised Service Centre.

REPLACING THE LAMP

The appliance is equipped with a long-

life LED interior light.

It is strongly recommended to use

original spare parts only.

Use LED bulbs (E14 base) only. The

maximum power is shown on the lamp

unit.

CAUTION! Disconnect the plug from

the mains socket.

1. With your fingers, spread slightly both sides of

the transparent cover to unhook them and

detach the cover pulling it in the direction of

the arrows.

Possible cause

The water outlet is clogged.

The melting water outlet is

not connected to the evapo-

rative tray above the com-

pressor.

The temperature regulator is

not set correctly.

The door is not closed cor-

rectly.

The food products' tempera-

ture is too high.

Many food products are stor-

ed at the same time.

The thickness of the frost is

greater than 4-5 mm.

The door has been opened

often.

There is no cold air circula-

tion in the appliance.

2. Replace the lamp with the one that has

identical characteristics and is specifically

designed for household appliances.

3. Reassemble the lamp cover.

4. Connect the plug to the mains socket.

5. Open the door.

Make sure that the light switches on.

CLOSING THE DOOR

1. Clean the door gaskets.

Solution

Clean the water outlet.

Attach the melting water outlet to

the evaporative tray.

Set a higher/lower temperature.

Refer to "Closing the door".

Let the food products tempera-

ture decrease to room tempera-

ture before storage.

Add less food products at the

same time.

Defrost the appliance.

Open the door only if necessary.

Make sure that there is cold air

circulation in the appliance.