Zanussi ZBT23420SA Kullanıcı Kılavuzu - Sayfa 11
Dondurucu Zanussi ZBT23420SA için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Zanussi ZBT23420SA 16 sayfaları.
Ayrıca Zanussi ZBT23420SA için: Kullanıcı Kılavuzu (28 sayfalar), Kullanıcı Kılavuzu (48 sayfalar)
Sayfayı Yazdır
Climate
Ambient temperature
class
T
+16°C to + 43°C
Some functional problems might
occur for some types of models
when operating outside of that
range. The correct operation can
only be guaranteed within the
specified temperature range. If you
have any doubts regarding where to
install the appliance, please turn to
the vendor, to our customer service
or to the nearest Service Centre
Electrical connection
• Before plugging in, ensure that the voltage
and frequency shown on the rating plate
correspond to your domestic power supply.
• The appliance must be earthed. The power
supply cable plug is provided with a contact
for this purpose. If the domestic power
supply socket is not earthed, connect the
appliance to a separate earth in compliance
with current regulations, consulting a
qualified electrician.
• The manufacturer declines all responsibility if
the above safety precautions are not
observed.
• This appliance complies with the E.E.C.
Directives.
Ventilation requirements
The airflow behind the appliance must be
sufficient.
5 cm
min. 200cm
min.
200cm
www.zanussi.com
2
2
Door reversibility
WARNING!
Before carrying out any operations,
remove the plug from the power
socket.
CAUTION!
To carry out the following
operations, we suggest that this be
made with another person that will
keep a firm hold on the doors of the
appliance during the operations.
1. Loosen the upper pin and remove the
spacer.
2. Remove the upper pin and the upper door.
3. Loosen the middle hinge.
4. Remove the lower door.
5. Loosen the lower pin.
6. Install the lower pin on the opposite side.
7. Tighten the middle hinge.
8. Install the upper door.
9. Tighten the spacer and tighten the upper
pin.
11