Zanussi ZEC 30 Talimat Kitapçığı - Sayfa 8

Dondurucu Zanussi ZEC 30 için çevrimiçi göz atın veya pdf Talimat Kitapçığı indirin. Zanussi ZEC 30 15 sayfaları. Zanussi instruction booklet freezer zec 30

Sayfayı Yazdır

Once the top of the panel has been correctly

positioned, ﬁx it through the holes in the bottom

bracket, without tightening the screws (Fig. 10).

D471

Check the position again by slackening the screws

and pins then, once the best position has been

obtained, fully tighten all the ﬁxings.

Cover the visible part of the top bracket on the

panel with plastic cover (D), inserting it in the

locations provided in the bracket.

D472

Fig. 10

Fig. 11

Once the door has ben correctly aligned, tighten the

holding nuts on the ﬁxing brackets and attach the

appliance to the adjacent units and the bottom of

the work surface (Fig. 12).

D517

For a correct installation operation if the base plate

is more than 100 mm (for cavity height 820 mm) or

more than 150 mm (for cavity height 870 mm) you

must cut out the plate as shown in Fig. 13.

D593

Fig. 12

Fig. 13