Zanussi ZUT 1256 Talimat Kitabı - Sayfa 16

Dondurucu Zanussi ZUT 1256 için çevrimiçi göz atın veya pdf Talimat Kitabı indirin. Zanussi ZUT 1256 20 sayfaları. Zanussi freezer instruction book

Remove the fridge door by gently pulling

downwards and store to avoid damage.

Unscrew the top door hinge pin of the refrigerator

then screw it back on the other side. As shown in

the second drawing.

Replace the fridge door on the upper door hinge

pin.

Insert the lower door hinge pin into the door and

tighten all screws.

Re-fix the retained screw to the bottom right hand

side and replace the 2 adjustable feet.

Lift the fridge back onto its feet and check it is set

level and the door seal meets the fridge all around

the door.

Transfer the handle to the opposite side and place

the plastic covering inserts, (supplied in the plastic

bag of this instruction book) into the holes set free.

Reconnect the fridge to the electricity supply.

Any electrical work required to install this

appliance should be carried out by a

qualified electrician or competent person.

This appliance must be earthed.

The manufacturer declines any liability should

these safety measures not be observed.

Electrical Requirements

Before switching on, make sure the electricity supply

voltage is the same as that indicated on the appliance

rating plate.

The appliance is supplied with a 13 amp plug fitted. In

the event of having to change the fuse in the plug

supplied, a 13 amp ASTA approved (BS 1362) fuse

must be used. Should the plug need to be replaced

Electrical Connection