Zanussi ZV255RM Talimat Kitabı - Sayfa 11

Dondurucu Zanussi ZV255RM için çevrimiçi göz atın veya pdf Talimat Kitabı indirin. Zanussi ZV255RM 12 sayfaları.

Door Reversal

1. Close the cabinet and remove the plug from the

electrical socket.

2. Remove the ventilation grille. There is a part on

the grille that can be removed. Reposition it and put

it on the other side.

3. Put the cabinet on a wooden board when it is laid

down. Later, when raising the cabinet, it will be

easier to grip under the cabinet thanks to the board.

4. On the upper part of the cabinet. Put the hinge pin

on the other side.

5. On the lower part of the cabinet. Unscrew the

hinge. Move the hinge pin and plastic cover. Secure

the hinge on the other side.

6. Raise the cabinet and replace the ventilation grille.

7. Change the position of the handle.

Remove the cover washers concealing the screws. If

the washers are difficult to remove, use a small, flat

screwdriver.

Then unscrew the handle.

Carefully press the plastic plugs into the holes on the

side opposite that of the door using a drift. Secure

the handle in the plug holes. If the handle is

mounted by hand, then turn the screws in the holes a

couple of times prior to securing the handle. Press

the supplied plastic plugs into the holes to which the

handle was previously fitted.

8. Put the cabinet in position. Check that it stands

straight. See the section "Positioning the cabinet".

Zanussi 818 18 83-02/9