Zanussi ZHP 637 Kurulum, Kullanım ve Bakım El Kitabı - Sayfa 13

Havalandırma Davlumbazı Zanussi ZHP 637 için çevrimiçi göz atın veya pdf Kurulum, Kullanım ve Bakım El Kitabı indirin. Zanussi ZHP 637 40 sayfaları.
Ayrıca Zanussi ZHP 637 için: Kurulum ve Kullanım Kılavuzu (11 sayfalar), Kullanım Kılavuzu (40 sayfalar)

Zanussi ZHP 637 Kurulum, Kullanım ve Bakım El Kitabı
DUCTED VERSION AIR EXHAUST SYSTEM
When installing the ducted version, connect the hood to
the chimney using either a flexible or rigid pipe ø120
mm, the choice of which is left to the installer.
• Fix the pipe in position using sufficient pipe clamps
(not supplied).
• Remove any activated charcoal filters.
RECIRCULATION VERSION AIR OUTLET
• Cut a hole ø 125 mm in any shelf that may be posi-
tioned over the hood.
• Connect the flange to the outlet on the shelf over the
hood using a flexible or rigid pipe ø120 mm.
• Fix the pipe in position using sufficient pipe clamps
(not supplied).
• Fix the directional grille 8 on the recirculation air
outlet using the 2 screws 12e (2,9 x 9,5) provided.
• Ensure that the activated charcoal filters have been
inserted.
• Connect the hood to the mains through a two-pole switch having a contact gap of at least 3
mm.
• When opening the sliding carriage for the first time after installing the hood, pull it out
briskly until it clicks.
EN
Downloaded from www.vandenborre.be
Connections
ELECTRICAL CONNECTION
ø 120
12e
8
8
125
125
9
9
1
13
3