Zanussi ZHP615 Kullanım Kılavuzu - Sayfa 13

Havalandırma Davlumbazı Zanussi ZHP615 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Zanussi ZHP615 40 sayfaları.
Ayrıca Zanussi ZHP615 için: Kurulum ve Kullanım Kılavuzu (11 sayfalar), Kurulum ve Kullanım Kılavuzu (8 sayfalar), Kurulum, Kullanım ve Bakım El Kitabı (40 sayfalar)

Connections

Ducting Version AirExhaust System

When installing the hood in ducting version, a rigid or

a flexible pipe with the diameter corresponding to the

flange diameter is used in order to connect the hood

to the air outlet piping.

• Fix the pipe with an adequate quantity of pipe clamps

(not supplied).

• Remove possible charcoal filters.

Recirculation Version AireOutlet

• Cut a hole ø 125 mm in any shelf that may be posi-

tioned over the hood.

• Insert the flange 10a on the hood body outlet.

• Connect the flange to the outlet on the shelf over

the hood using a flexible or rigid pipe ø120 mm.

• Fix the pipe in position using sufficient pipe clamps

(not supplied).

• Fix the directional grille 8 on the recirculation air outlet

using the 2 screws 12e (2,9 x 12,7) provided.

• Ensure that the activated charcoal filters have been

inserted.

Electrical Connection

• Connect the hood to the mains through a two-pole

switch having a contact gap of at least 3 mm.

• When opening the sliding carriage for the first time

after installing the hood, pull it out briskly until it

clicks.

��

�

��

�