Zanussi ZCG63260XE Kullanıcı Kılavuzu - Sayfa 14
Ocaklar Zanussi ZCG63260XE için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Zanussi ZCG63260XE 32 sayfaları.
Ayrıca Zanussi ZCG63260XE için: Kullanıcı Kılavuzu (29 sayfalar)
Sayfayı Yazdır
6.2 Burner overview
6.3 Replacing burner parts
1. Put carefully the burner crown on the
burner body. Let the crown fall freely onto
the body. Do not use force.
Make sure that the hole in the crown is
above the ignition candle.
Make sure that the location pegs are in
the slots in the burner body.
Make sure that you can move the crown a
small distance from side to side.
2. Put the burner cap centrally on top of the
crown.
Make sure that the cap is correctly
installed, with the enamel side up and you
14
ENGLISH
A. Burner cap
B. Burner crown
C. Ignition candle
D. Thermocouple
A
B
C
D
A. Burner cap
B. Burner crown
C. Ignition candle
D. Thermocouple
C
D
3. Light the burner.
If the burner does not ignite, adjust the crown
and cap again.
6.4 Turning the burner off
To put the flame out, turn the knob to the off
position
Always turn the flame down or switch it
off before you remove the pans from the
burner.
can move the cap from side to side and
front to back.
.
WARNING!