Zanussi ZCG92296 Kullanıcı Kılavuzu - Sayfa 11

Ocaklar Zanussi ZCG92296 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Zanussi ZCG92296 28 sayfaları.

Sayfayı Yazdır
Pan supports
The pan supports are not resistant
to washing in a dishwasher. They
must be washed by hand.
1. Remove the pan supports to easily clean
the hob.
Be very careful when you
replace the pan supports to
prevent the hob top from
damage.
2. The enamel coating occasionally can have
rough edges, so be careful when you wash

Oven - Daily use

WARNING!
Refer to Safety chapters.
Oven Functions
Oven function
Off position
Grilling
Oven lamp
Turnspit
1 - 8
Gas Multifunction
1) 1 - 140°C, 2 - 155°C, 3 - 170°C, 4 - 180°C, 5 - 195°C, 6 - 215°C, 7 - 225°C, 8 - 240°C
Ignition of the oven gas burner
CAUTION!
When turning on the oven burner
the oven door must be opened.
CAUTION!
Make sure that the lid is opened.
When using the oven the lid has to
be opened to avoid over-heating.
www.zanussi.com
the pan supports by hand and dry them. If
necessary, remove stubborn stains with a
paste cleaner.
3. After you clean the pan supports, make sure
that they are in correct positions.
4. For the burners to operate correctly make
sure that the arms of the pan supports are
aligned with the centre of the burner.
Periodic maintenance
Speak to your local Authorised Service Centre
periodically to check the conditions of the gas
supply pipe and the pressure adjuster, if fitted.
The appliance is off.
To grill flat food in the middle of the grill. To make toast.
To illuminate the oven interior.
To use this function, press the button for the lamp.
To spit roasting meat.
To cook several different dishes at the same time. To
cook home-made syrup, dry mushrooms or fruit.
The fan always operates when a heat setting is set.
Oven safety device:
The gas oven has a thermocouple. It
stops the gas flow if the flame goes
out.
1. Open the oven door.
2. Ignite the oven gas burner.
• For integrated ignition on the control
knob turn the knob for the oven
functions counterclockwise to the
maximum heat settings and push it to
light the burner.
Application
1)
11