Zanussi ZCV66050XA Kullanıcı Kılavuzu - Sayfa 19

Ocaklar Zanussi ZCV66050XA için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Zanussi ZCV66050XA 25 sayfaları.
Ayrıca Zanussi ZCV66050XA için: Kullanıcı Kılavuzu (28 sayfalar)

Sayfayı Yazdır

LEVELLING OF THE APPLIANCE

Use small feet on the bottom of appliance to set the

appliance top surface level with other surfaces.

ELECTRICAL INSTALLATION

WARNING! The manufacturer is not

responsible if you do not follow the

safety precautions from Safety

chapters.

This appliance is supplied without a main plug or a

main cable.

Applicable types of cables for different

phases:

Phase

3 with neutral

WARNING! The power cable must

not touch the part of the appliance

shaded in the illustration.

Min. size cable

3x6.0 mm²

5x1.5 mm²

COVERING TERMINAL BOARD

•

The recommended cross-section area is six

square millimetres (6 mm²).

•

When you refit the mains terminal cover, make

sure that the lower tabs are located inside the

bottom edge of the aperture, before you fix the

two screws into the top edge of the mains

terminal cover.

•

Make sure that the cover is securely fastened.

To open the cover of terminal board

obey the procedure in opposite

sequence.

TERMINAL BOARD

Do not remove blanking plates.

Make sure that the links are fitted as shown.