3Com Switch 4500 Family Hızlı Referans Kılavuzu - Sayfa 10
Ağ Donanımı 3Com Switch 4500 Family için çevrimiçi göz atın veya pdf Hızlı Referans Kılavuzu indirin. 3Com Switch 4500 Family 17 sayfaları. Switch 4500 10/100 family
Ayrıca 3Com Switch 4500 Family için: Veri Sayfası (16 sayfalar), Ürün Kılavuzu (13 sayfalar), Ürün Kılavuzu (15 sayfalar), Veri Sayfası (8 sayfalar), Veri Sayfası (8 sayfalar), Veri Sayfası (9 sayfalar)
Sayfayı Yazdır
Command
radius scheme
remote-ping
remote-ping-agent enable
return
rip
rmon alarm
rmon event
rmon prialarm
route-policy
rsa local-key-pair create
rsa local-key-pair destroy
rsa peer-public-key
set unit "[name]"
sftp server enable
snmp-agent community
snmp-agent group
snmp-agent local-engineid
snmp-agent mib-view
snmp-agent packet max-size
snmp-agent sys-info
snmp-agent target-host
snmp-agent trap enable
snmp-agent trap life
snmp-agent trap queue-size
snmp-agent trap source
snmp-agent usm-user
ssh2
ssh client (SSH server IP
address or name) assign rsa-
key (key name)
ssh client first-time enable
ssh server authentication-
retries (number of retries,
1-5)
ssh server timeout (value in
seconds, 1-120)
ssh user (username) service-
type sftp
ssh user (sername) assign
rsakey (key name)
Description
Specify RADIUS configuration information and enter the
RADIUS view (See
Table 11, "RADIUS Server Group View," on
page
13)
Specify the remote-ping test class
Enable a remote-ping client
Return to user view from any view other than user view
Enable RIP and enter RIP view (See
page
17)
Add an entry to the alarm table
Add an entry to the event table
Add an entry to the extended RMON alarm table
Specify a route policy and enter route policy view (See
Table 16, "Route Policy View," on page
Create local RSA host key pair and server key pair
Remove all RSA key pairs at the server, including host key pair
and Server key pair
Enter the public key view (See
View," on page
12)
Set the unit number name. "[name]"= text string
Enable SFTP Server
Configure community access name and access to SNMP
Configure an SNMP group
Configure a name for a local or remote SNMP engine on the
Switch
Create or update the view information
Specify the size of an SNMP packet
Configure system information of running SNMP
Configure destination of SNMP notification
Enable/disable the device to send Trap messages
Configure the timeout of Trap packets
Configure the information queue length of Trap packets sent
to the destination host
Configure the source address for sending Trap packets
Configure users in an SNMP group
Establish one telnet connection
Assign the SSH client an RSA Key
Set SSH client attribute of authenticating user for the first
time access
Define SSH authentication retry times value
Define timeout value for SSH registration authentication
Set SSH User service types, either stelnet, sft, or all. All is both
stelnet and sftp.
Associate an existing public key with a designated user
10
Table 17, "RIP View," on
16)
Table 8, "Public Key Edit
Web Command
Administration -> SNMP ->
Community String
Administration -> SNMP ->
Group
Administration -> SNMP ->
Traps
Administration -> SNMP ->
Traps
Administration -> SNMP ->
Users