Directed Viper 220 MAX Kurulum Kılavuzu - Sayfa 10

Güvenlik Sistemi Directed Viper 220 MAX için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Directed Viper 220 MAX 18 sayfaları. Recreational vehicle security system

Sayfayı Yazdır

Buttons

470T TRANSMITTER

An 470V can also be taught to the receiver. This optional transmitter is completely waterproof and could be the

ideal solution when the transmitter is exposed to water. When programmed as described on page 12, here is the

2-button transmitter configuration:

Button

operates the arm and the disarm state.

Button

is useed to control the Panic Mode when press for more than 1.5 seconds.

Buttons

Transmitter learn routine

To program 473 transmitter to the main control unit:

1. Green H 1/5 wire will need to be connected to ground for the learn routine to work.

and

activates the 508D perimeter sensor.

and

activates the 508D perimeter sensor.

Ignition. Turn the vehicle key to the "ON" or "RUN" position.

Choose. Press eight times on the Valet

time. The siren will chirp eight times.

Transmit. While holding the switch push in, press on the arm/disarm button of the first

transmitter ( you will hear one long chirp). Press on the arm/disarm button of the second

transmitter ( you will hear one long chirp again).

(473T)

/program push switch and hold it on the ninth