Alecto DBX-82 Kullanıcı Kılavuzu - Sayfa 15

Bebek Monitörü Alecto DBX-82 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Alecto DBX-82 17 sayfaları.

If a fault occurs, first check the operation of the DBX-82 at another location.

Does nothing:

- The battery pack of the parent unit is empty, recharge or replace.

- The power adapter of the baby unit is not plugged in, or there is no power

coming from the electrical outlet, check outlets.

Poor or no reception:

- The battery pack of the parent unit is empty, recharge or replace.

- The channel or sub-channel has been set incorrectly (the baby unit and the

parent unit must both be set to the same channel and sub-channel).

- The distance between the baby unit and the parent unit is too large, decrease

the distance.

Noise and other Interferences:

- Someone else is on the same channel, change of channel.

- Interference from other devices, turn off the other devices (if possible).

High Pitched Sound:

- The parent unit is too close to the baby unit or the volume of the parent unit is

too high, increase the distance or lower the volume.

If the fault is not resolved, then remove the battery pack from the parent unit and

remove the power adapter from the electrical wall outlet. Shut everything down

and after a few minutes start the unit up again.

Please contact your dealer if the problem is still not resolved.

INTERFERENCE CHART