Alecto DVM-77 Kullanıcı Kılavuzu - Sayfa 10

Bebek Monitörü Alecto DVM-77 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Alecto DVM-77 20 sayfaları.

4 USE

•

Slide the

on the baby unit.

•

Slide this switch downward to switch off the baby unit.

The green indicator on the baby unit flashes while the baby

unit is trying to establish a connection with the parent unit,

this indicator remains lit when the connection is successful.

Use the VOL+ and VOL- buttons to adjust the reception

volume for the talk-back function from the parent unit.

The baby unit is provided with built-in infra-red LEDs; these

LEDs will switch on automatically when the baby room

turns dark and will switch of again when it becomes light.

The LEDs can illuminate objects up to a distance of

approximately 2 meters.

When it's dark, that is when the night vision LEDs are

switched on, the images on the parent unit will be

displayed in black and white.

Attention: infra-red light cannot be perceived by the

human eye; that means you cannot tell whether the

infra-red LEDs are switched on with the naked eye.

Depending on the type of the infra-red LED, you might

be able to see a red glow.

4.2 PARENT UNIT:

Switching on/off:

•

Volume:

Use the VOL+ and VOL- buttons to set the loudness of

the sounds from the baby room that you hear through the

speaker of the parent unit

switch at the right side upward to switch

press briefly to switch on

press and hold for 2 seconds to turn off