Directed Directechs DB3 Kurulum Kılavuzu - Sayfa 7

Kontrol Ünitesi Directed Directechs DB3 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Directed Directechs DB3 20 sayfaları. Smart key for 2013 toyota highlander
Ayrıca Directed Directechs DB3 için: Kurulum Kılavuzu (20 sayfalar), Kurulum Kılavuzu (19 sayfalar), Manuel (6 sayfalar), Kurulum Kılavuzu (18 sayfalar), Kurulum Kılavuzu (18 sayfalar), Kurulum Kılavuzu (19 sayfalar), Kurulum Kılavuzu (20 sayfalar), Kurulum Kılavuzu (19 sayfalar), Kurulum Kılavuzu (20 sayfalar), Kurulum Kılavuzu (10 sayfalar), Kurulum Kılavuzu (19 sayfalar), Kurulum Kılavuzu (19 sayfalar), Kurulum Kılavuzu (20 sayfalar), Kurulum Kılavuzu (20 sayfalar), Kurulum Kılavuzu (20 sayfalar), Kurulum Kılavuzu (10 sayfalar), Kurulum Kılavuzu (20 sayfalar), Kurulum Kılavuzu (20 sayfalar), Kurulum Kılavuzu (19 sayfalar), Kurulum Kılavuzu (20 sayfalar), Kurulum Kılavuzu (20 sayfalar), Kurulum Kılavuzu (18 sayfalar), Kurulum Kılavuzu (20 sayfalar), Kurulum Kılavuzu (19 sayfalar), Kurulum Kılavuzu (19 sayfalar), Kurulum Kılavuzu (18 sayfalar), Kurulum Kılavuzu (19 sayfalar), Kurulum Kılavuzu (20 sayfalar), Kurulum Kılavuzu (18 sayfalar), Kurulum Kılavuzu (19 sayfalar), Kurulum Kılavuzu (20 sayfalar), Kurulum Kılavuzu (20 sayfalar), Kurulum Kılavuzu (20 sayfalar), Kurulum Kılavuzu (18 sayfalar), Kurulum Kılavuzu (20 sayfalar), Kurulum Kılavuzu (19 sayfalar), Kurulum Kılavuzu (20 sayfalar), Kurulum Kılavuzu (18 sayfalar), Kurulum Kılavuzu (19 sayfalar), Kurulum Kılavuzu (17 sayfalar), Kurulum Kılavuzu (20 sayfalar), Kurulum Kılavuzu (18 sayfalar)

Sayfayı Yazdır
Directed Directechs DB3 Kurulum Kılavuzu

Vehicle connections

The connection information listed below is specific to the 2023 Kia Seltos. Refer to "Pre-installation and application warnings" for a list of important notes.
Data 14-pin blue connector (H1)
Module
Conn./Pin
Color
H1/1
Light Green
H1/2
Violet/Yellow
H1/3
Tan/Black
H1/4
Tan
H1/5
Orange/Green
H1/6
Orange/Brown
H1/7
Brown
H1/8
Yellow
H1/9
Orange/Yellow
H1/10
Orange/Red
H1/11
Yellow/Red
H1/12
Brown/Red
H1/13
Red
H1/14
Black
Output 12-pin red connector (H2)
Module
Conn./Pin
Color
H2/1
Black/White
H2/2
Green/Black
H2/3
Green/White
H2/4
Red/Black
H2/5
Violet/White
7
403.HK18 1.18 2023 Kia Seltos
©2023 Directed. All rights reserved.
Description
No Connection
No Connection
(DATA) HS CAN High 1
(DATA) HS CAN Low 1
(DATA) HS CAN High 2
(DATA) HS CAN Low 2
Relay N.O. - No Connection
Relay COM - Immo. Data Interrupt (connector side)
Relay N.C. - Immo. Data Interrupt (vehicle side)
[4]
Relay N.C. - Accessory Interrupt (vehicle side)
[4]
Relay COM. - Accessory Interrupt (conn. side)
Relay N.O. - No Connection
(+) W2W Only - 12 Volt
(-) W2W Only - Ground
Description
(-) W2W Only - E-Brake Output
[4]
(-) Ignition Interrupt Output
(-) W2W Only - Door Output
(-) W2W Only - Trunk Output
[2]
(AC) W2W Only - Tach Output
Connects To
Wire Location
No Connection
No Connection
ICU Junction Block-Dash Fuse Box, rear, white 22 pin plug (G), pin 9
ICU Junction Block-Dash Fuse Box, rear, white 22 pin plug (G), pin 8
ICU Junction Block-Dash Fuse Box, rear, white 22 pin plug (G), pin 5
ICU Junction Block-Dash Fuse Box, rear, white 22 pin plug (G), pin 15
No Connection
[3]
Driver Kick, black 82 pin plug (EM11), pin 20
This connection is not required in US vehicles without transponder.
[3]
Driver Kick, black 82 pin plug (EM11), pin 20
This connection is not required in US vehicles without transponder.
ICU Junction Block-Dash Fuse Box, rear, blue 58 pin plug (E), pin 55
The connection is only required to maintain OEM remote functionality during
remote start. The TPMS light will come ON during runtime or idle mode and
will go out after vehicle takeover.
ICU Junction Block-Dash Fuse Box, rear, blue 58 pin plug (E), pin 55
The connection is only required to maintain OEM remote functionality during
remote start. The TPMS light will come ON during runtime or idle mode and
will go out after vehicle takeover.
No Connection
Remote Starter
Remote Starter
Connects To
Wire Location
Remote Starter
Must use a relay.
5A fuse to 12V.
ICU Junction Block-Dash Fuse Box, rear, blue 58 pin plug (E), pin 45
The connection is only required to maintain OEM remote functionality during
remote start. The TPMS light will come ON during runtime or idle mode and
will go out after vehicle takeover.
Remote Starter
Remote Starter
Remote Starter
An optional connection required on some remote starters, which do not
support a tach signal in D2D.
(+/-)
Wire Color
Data
White (P-CAN)
Data
Brown (P-CAN)
Data
White (B-CAN)
Data
Black (B-CAN)
Data
White/Orange
Data
White/Orange
Cut
Orange
Cut
Orange
(+/-)
Wire Color
Cut
Pink