Alecto DVC-150IPV2 Kullanıcı Kılavuzu - Sayfa 4

Güvenlik Kamerası Alecto DVC-150IPV2 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Alecto DVC-150IPV2 17 sayfaları.

Sayfayı Yazdır

2.2

1. Connect the IP camera, as described in section 2.1.

2. Download a QR code scanner (e.g. barcode scanner) from the Google Play store, if you

have not done so already.

3. Search the Google Play Store for the free 'Alecto Security' app to download and install.

4. Start the Alecto Security App. (make sure you use the same WiFi network that your

camera is connected to).

5. Press the text "Click here to add camera'.

6. You can activate the camera in three ways through: A. QR code, B. Network Scan, or C.

Manually.

A. Press the 'Scan' button so that the QR code scanner (if you have installed the App.) will

scan the UID-code located at the back of the camera.

B. Press the 'Search' button to search for available cameras on the same network that

your Smartphone/Tablet is logged on. This only works if the Smart phone or Tablet is

connected with the same WiFi router or modem as the camera is connected to. A popup

screen(s) will show the camera(s) which are found. Choose a camera.

C. Tap directly on the blank space next to "UID" in order to enter the UID code manually.

The UID code can be found on the label located at the bottom of the camera.

7. Now click on the empty space next to password and enter the password. By default the

password is 123456. This can and SHOULD be changed later to your own password.

Failure to do this is a security risk as third parties may gain access to your images. (See

section 4.6).

8. Under "Name" change the name of the camera to your own chosen name.

9. Now click on "ok".

10. There should now be an established connection with the camera. Under the word 'camera'

is the word 'connect'. When there is an established connection, the word 'connect' will

change to 'online'. There will now be an established connection with the camera. Press on

the name of the camera in order to view the live image.

11. Should you receive an 'Unknown Device' or 'Offline' notification press the

the

Reconnect

Alecto Security

Online

Click here to add camera

re-connect' button.

100%

10:35

Add Camera

Device Setting

UID:

Scan

Security Code:

Name:

Camera

Cancel

Alecto Security

Reconnect

Edit Camera

View Snapshot

Remove Camera

button then

Alecto Security

Live View: Camera

Online

640x480

Online: Quality:

Good

MUTE