Blackberry ITC100-2 Kurulum Kılavuzu - Sayfa 6

Radar Blackberry ITC100-2 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Blackberry ITC100-2 28 sayfaları. Dry van, insulated trailers roll-up doors
Ayrıca Blackberry ITC100-2 için: Kurulum Kılavuzu (33 sayfalar), Kurulum Kılavuzu (26 sayfalar), Kurulum Kılavuzu (32 sayfalar), Kurulum Kılavuzu (33 sayfalar), Kurulum Kılavuzu (35 sayfalar), Kurulum Kılavuzu (28 sayfalar), Kurulum Kılavuzu (34 sayfalar), Kurulum Kılavuzu (35 sayfalar), Kurulum Kılavuzu (30 sayfalar), Kurulum Kılavuzu (35 sayfalar), Kullanım Kılavuzu (33 sayfalar), Kurulum Kılavuzu (32 sayfalar), Kurulum Kılavuzu (26 sayfalar), Kurulum Kılavuzu (25 sayfalar), Kullanım Kılavuzu (35 sayfalar)

BLACKBERRY RADAR H2 ITC100-1, ITC100-2, ITF100-1 INSTALLATION GUIDE

types of fasteners. Please Note: Your choice of fastener will influence the size of the tools

required to create the mounting holes (i.e. drill bits) and install or remove the fasteners (i.e.

wrenches/sockets/drivers). An example of this is provided below. The actual length of the

fasteners will be determined by the thickness of your mounting surface.

IMPORTANT: The maximum fastener thread diameter

supported by this product is ¼" or M6 (6 mm).

For most secure fastening, we do not recommend

using fasteners with a diameter less than that of a ¼"

or M6 fastener.

Box Section

(+3mm wall thickness)

I-Beam / Panel Section

(with rear access)

2 self-tapping screws and washers

(3/8" head, 1/4"-14 thread, 1-1/2" length)

2 hex bolts, nuts, and 4 washers

(7/16" head, 1/4"-20 thread, 1/4"-20 nut, 2" length)

(11mm head, M6 thread, 50mm length, M6 nut)

FLATBED AND HEAVY EQUIPMENT

Drill Bit

Nut Driver/Socket/Wrench

Drill Bit

Nut Driver/Socket/Wrench

3/16" (5mm)

1/4" (6mm)