Blackberry Radar H2 Kurulum Kılavuzu - Sayfa 13

Radar Blackberry Radar H2 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Blackberry Radar H2 30 sayfaları. Dry van, insulated trailers roll-up doors
Ayrıca Blackberry Radar H2 için: Kurulum Kılavuzu (33 sayfalar), Kurulum Kılavuzu (26 sayfalar), Kurulum Kılavuzu (25 sayfalar), Kurulum Kılavuzu (32 sayfalar), Kurulum Kılavuzu (33 sayfalar), Kurulum Kılavuzu (34 sayfalar), Kurulum Kılavuzu (35 sayfalar), Kullanım Kılavuzu (33 sayfalar), Kurulum Kılavuzu (32 sayfalar), Kurulum Kılavuzu (26 sayfalar), Kurulum Kılavuzu (25 sayfalar), Kurulum Kılavuzu (28 sayfalar)

Sayfayı Yazdır
Blackberry Radar H2 Kurulum Kılavuzu

3.2 Installation tools

Required tools to complete the installation:
Phillips (PH2) Screwdriver or Bit
Nut Driver or
Socket Wrench with Socket*
*Nut Driver + Drill offers fastest installation.
If no Nut Driver is available, a socket wrench
and socket may be used as a substitute.
Recommended tools to complete the installation:
T-Square
Pocket Level
Small Step Ladder
*For more convenient installation
inside of containers or the exterior of
smaller vehicles.
BLACKBERRY RADAR H2 ITC100-1 INSTALLATION GUIDE 13
Drill and Drill Bits
Safety Glasses
Towel
Tape Measure
Tape
Pencil or
Non-Permanent Marker
Large Screwdriver
(Flathead)
Wrench
*Required only if nuts and bolts
are used.
Hammer and
Ladder
Punch
*For more convenient installation
on taller vehicles and containers.
File
Cutting Lubricant*
(Recommended)
*Recommended for faster drilling speed
on thicker metals and longer drill bit life.