Blackberry RADAR H2 ITC100-1 Kurulum Kılavuzu - Sayfa 2
Radar Blackberry RADAR H2 ITC100-1 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Blackberry RADAR H2 ITC100-1 30 sayfaları. Magnet accessory
Ayrıca Blackberry RADAR H2 ITC100-1 için: Kurulum Kılavuzu (33 sayfalar), Kurulum Kılavuzu (28 sayfalar), Kurulum Kılavuzu (35 sayfalar), Kurulum Kılavuzu (25 sayfalar), Kurulum Kılavuzu (35 sayfalar)
Sayfayı Yazdır
32
BLACKBERRY RADAR H2 ITC100-1 INSTALLATION GUIDE
4. Using a drill bit, drill a hole through each of the cross hairs on the template. This will
create four holes you will use to mount the module.
Drilling tips for intermodal installations
Due to the thicker, harder steel used on intermodal containers, you may wish
to follow these suggestions.
Tip 1: To shorten drilling time and prolong the life of your drill bit, you may
wish to use cutting tool lubricant during the drilling process.
Tip 2: For most precise hole drilling, before drilling your hole, you may wish
to use a punch and hammer to help place the drill bit. This will prevent the
bit from "walking" during the drilling operation.