Clarke American Sanders B2 Operatör El Kitabı - Sayfa 4
Sander Clarke American Sanders B2 için çevrimiçi göz atın veya pdf Operatör El Kitabı indirin. Clarke American Sanders B2 20 sayfaları. 7" spinner edger ce
Sayfayı Yazdır
DANGER:
Operating partially assembled sanding equipment could result in injury to the operator or by-
stander and could cause damage to the equipment or to other property.
•
Do not operate this equipment unless it it fully assembled and all guards, doors and covers
are secured.
•
Keep all fasteners tight.
•
Keep all adjustments within manufacturers specifi cations.
DANGER:
Moving parts on this sanding equipment can cause injury to the operator or bystanders.
•
Keep hands, feet and loose clothing away from all moving parts.
•
Do not change or adjust the abrasive while the sanding equipment is running.
•
Do not service the sanding equipment while it is running.
DANGER:
This sanding equipment requires a supply of electricity. Improper use could result in electrical
shock or fi re.
•
Connect only to an electrical source matching what is shown on the equipment nameplate.
•
Do not use this sanding equipment on an ungrounded electrical circuit. Consult an electri-
cian if you suspect the circuit is not properly grounded.
•
Do not use this sanding equipment with a damaged electrical cord. Inspect before each
use.
•
Avoid striking the elelctrical cord with the abrasive. Always lift the electrical cord over the
sanding equipment.
•
Do not use the electrical cord to move the sanding equipment.
•
Disconnect the electrical source before servicing this equipment.
WARNING:
Injury to the operator or bystander can occur if protective gear is not worn while sanding. Always
use eye, ear, and respiratory protection while performing any sanding operation.
WARNING:
Bodily injury could occur if power is applied to the equipment with the power switch already in
the "ON" position. Always check to assure that the power switch is in the "OFF" position before
connecting power supply.
CAUTION:
Maintenance and repairs performed by unauthorized personnel could result in damage or injury.
Maintenance and repairs performed by unauthorized personnel will void your warranty. Servicing
of this unit must always be referred to an authorized Clarke American Sanders distributor.
CAUTION:
Use of this equipment to move other objects or to climb on could result in injury or damage. Do
not use this equipment as a step or furniture. Do not ride on this equipment.
CAUTION:
Damage could occur to the equipment if not properly kept in a dry building for storage.
the equipment in a dry building.
CAUTION:
Serious damage to the fl oor can occur if the sanding equipment is left running in one spot while
the sanding disc is in contact with the fl oor. To avoid damage to the fl oor, do not dwell while
lowering or raising the sanding disc. Always sand with a constant motion.
- 4 - FORM NO. 70162B
American Sanders B-2 (CE) Operator's Manual
Clarke
®
Store