Blackberry HS-250 Kullanıcı Kılavuzu
Kulaklıklar Blackberry HS-250 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Blackberry HS-250 9 sayfaları. Universal headset
Ayrıca Blackberry HS-250 için: Kullanım Kılavuzu ve Güvenlik Bilgileri (20 sayfalar)
Sayfayı YazdırBlackBerry Universal Headset
HS-250
[English US]
User Guide and Safety Information
Getting started
Components
Safety information
Before you get started, please read the safety and operation instructions in this
guide before using the BlackBerry Universal Headset or any accessories provided with
the headset. Keep this guide in a safe place so that you can refer to it whenever you
need it.
The headset uses 128-bit encryption software. In some countries there may be
restrictions on using Bluetooth enabled and wireless devices with encryption software.
Check with your local authorities for the restrictions in your area.
> Important: In some countries, regions, states, or provinces there might be
restrictions on the use of any mobile devices while driving. You are responsible for
knowing and complying with the local laws and regulations in the area that you use the
headset.
To find the latest safety and product information, visit www.blackberry.com/go/docs .
Pairing the headset
Pair and connect the headset with your BlackBerry device
Before you can use your headset, you need to pair it with your BlackBerry device.
When you turn on the headset for the first time, it's already in pairing mode.
1. Slide the power switch on your headset to the On position.
2. On the Home screen of your BlackBerry device, go to the Bluetooth settings.
• For devices running BlackBerry Device Software 7.0 or later, click
Manage Connections icon > Networks and connections > Bluetooth
Connections > Turn Bluetooth On > Add New Device > Search.
3. Click BlackBerry HS-250.
4. If you receive a prompt to enter a passkey, type 0000 on your BlackBerry device.
5. Press the
key on the keyboard.
If you are disconnected, you can press and hold the Call control button for 5 seconds
to turn on pairing mode at any time.
To turn off the prompt that appears on your BlackBerry device when connecting and
pairing, press the Menu key > Device Properties and set the Trusted field to Yes. For
more information, click the Help icon on the Home screen of your BlackBerry device.
For information about how to pair a third-party Bluetooth enabled device with your
headset, see the help that came with that device.
To pair your headset with an additional device, press and hold the Call control button
for 5 seconds and complete the pairing procedure above.
Using the headset
Call tasks
You can complete the following call tasks when your headset is paired and connected
with your device.
Action
Make a call
Answer a call
Answer a second call
Call control button
Press and hold until you hear 1 beep.
Say a voice command.
Tap 1 time
Tap 1 time
% " $ ! ) ' ! # ' % + ! " % * ) ! - % * " & ! * " * % ) % ) & ! * " % * " ) & " ) & " * % % & & * & ! ' ) ! 1
MAT-53173-001 | PRINTSPEC-124 | SWD -2019636-0914042648-001 |
Action
Return to the first call or switch between
calls
Join two calls
End a call
Turn on mute
Turn off mute
Ignore a call
Redial the last phone number
Common tasks
Action
Turn on pairing mode
Cancel pairing mode
Clear pairing list
Voice confirmations
Your headset helps confirm the actions you've completed with short statements (in
English) that you hear through your headset.
Action
Turned on mute
Turned off mute
Switched between 2 calls
Redialed a phone number
Ended a call
Bluetooth® connection is no longer
active
Battery power level is below 10%
Charge the headset
Your headset comes partially charged and ready for use. When the battery power level
is low you hear a voice prompt (in English) that says "Battery low".
1. Connect the small end of the micro-USB cable or a car charger to the charging
port on the headset.
2. Do one of the following:
• Connect the large end of the micro-USB cable to a USB power plug or the USB
port on your computer.
• Plug the car charger into your car's power outlet.
Change the earpiece
Try different combinations of the ear gels and the ear hook to find your best fit.
1. If necessary, gently pull the ear hook to remove it.
2. Gently pull off the ear gel at its edges.
3. Replace the ear gel with a new ear gel.
LED notifications
Slow flashes: microphone is muted
Quick flashes: not connected to the device
Quick flashes, followed by a pause: battery power level is low
Call control button
Press and hold until you hear 1 beep.
Press and hold until you hear 2 beeps.
Tap 2 times
Tap 1 time
When mute is turned on, your headset
beeps periodically.
Tap 1 time
Tap 2 times
Tap 2 times
Call control button
Press and hold for 5 seconds.
Tap 1 time
Press and hold for 8 seconds while
sliding the power switch to the On
position.
Voice confirmation
"Muted"
"Unmuted"
"Call swapped"
"Redialing last number"
"Call ended"
"Disconnected"
Battery low"
Red LED