Clarke Contractor CON180 Kullanım ve Bakım Talimatları - Sayfa 12

Sander Clarke Contractor CON180 için çevrimiçi göz atın veya pdf Kullanım ve Bakım Talimatları indirin. Clarke Contractor CON180 16 sayfaları.

SPECIFICATIONS

Item

Dimensions (L x W x H)

Weight

Backing pad type

Disc Diameter

Operating voltage & Frequency

Fuse Rating

Motor Power

No Load Speed

Sound Pressure Level (LpA dB)

Sound Power Level (LwA dB)

Vibration (front handle)

Please note that the details and specifications contained herein, are correct at

the time of going to print. However, CLARKE International reserve the right to

change specifications at any time without prior notice.

Replacement bonnets and abrasive discs are available from your CLARKE

dealer.

The Sander/Polisher Accessory Kit - CPK180 (Part No 3051995) includes:

• 1 x Foam Polishing Sponge

• 1 x Foam Rubber Backing Pad

• 1 x Rubber Backing Pad

• 1 x Synthetic Fleece Polishing Bonnet

• 1 x Wool Fleece Polishing Bonnet

• 3 x Sanding Discs (Grit 40, 60, 80)

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

Specification

515 x 95 x 126 mm

3.7 kg

Polymer with 'hook & loop' system

180 mm

230 V 50 Hz

13 A

1300 W

600-3300 rpm

LpA 86.0 dB(A)

LWA 97 db (A)

Less than 5.2 m