Aleko HTIO2BKBK Montaj Kılavuzu - Sayfa 6

Sıcak Küvet Aleko HTIO2BKBK için çevrimiçi göz atın veya pdf Montaj Kılavuzu indirin. Aleko HTIO2BKBK 14 sayfaları. Inflatable spa
Ayrıca Aleko HTIO2BKBK için: Montaj Kılavuzu (14 sayfalar)

Sayfayı Yazdır

PRIOR TO ASSEMBLY

Ensure All Parts are Present:

a. Spa Pool

b. Clip-on Top Cover

c. Inflation Hose

• Indoor Installation:

1. Floor should be a non-slip, level surface.

2. Floor must be able to withstand weight of the Spa+ occupants.

3. Before placing your hot tub indoors, ensure suitable drainage is available and can be reached.

Carefully consider the placement of yourSpa before installation.

4. Do not install the Spa on carpet or other material that can be damaged by moisture.

• Outdoor Installation:

1. Setup your Spa on a leve, solid foundation, and avoiding sharp objects as they could damage

the Spa.

2. Ensure your Spa is plugged into an external mains socket, professionally fitted, with weather

proofing. We DO NOT recommend using an extension cable as this can be a fire risk.

3. DO NOT OVERINFLATE your Spa- Air space needs to be left inside the wall of the Spa to allow for

air expansion (during hot weather) and contraction (during colder weather).

4. DO NOT PLACE your Spa in direct sunlight- The wall and rim of the Spa could bulge during hot

weather as the PVC heats up, putting additional stress on the internal welds, causing weld failures.

uring filling, emptying or when in use, water may spill out. Install near to a drainage point capable

of managing the volume of water.

d. Filter Cartridge

e. Filter Cartridge cover

f. Drainage Plug

g. Repair Patches

IMPORTANT:

h. Ground Sheet

i. Safety Locking Clip Keys

d&e