Clarke Contractor CROS2 Kullanım ve Bakım Talimatları - Sayfa 7
Sander Clarke Contractor CROS2 için çevrimiçi göz atın veya pdf Kullanım ve Bakım Talimatları indirin. Clarke Contractor CROS2 12 sayfaları. Random orbital sander
Sayfayı Yazdır
OPERATION
Insert the plug into the mains socket and switch on.
Hold the sander firmly with both hands and squeeze the trigger switch.
To switch the sander off, release the trigger switch.
Lock On Button
The trigger switch can be locked for
continuous sanding.
Press the Lock On button whilst squeezing
the trigger switch. To switch the sander
'OFF' when in continuous operation mode,
press the trigger switch fully and then
release it.
Variable Speed
Variable speed is achieved in two ways:
•
By depressing the switch fully for maximum speed or less for slower speed.
•
To control the maximum speed, turn the knob located on the trigger
switch from A(lower) - F(Faster).
Using The Sander
a) Before switching the sander ON, make sure that there are no nails or other objects
in the area to be sanded.
b) Switch the sander ON before applying it to the work surface. Move the sander
evenly over the work area. Never allow the sander to stay in one place for too
long as this will give an uneven finish.
c) Hold the sander with both hands, using both handles.
d) Replace worn sanding paper. The performance of your sander is dependant on
the quality of the sanding paper being used. Remove the sander from the work
area before switching it OFF, (wait until motor has stopped fully before putting tool
down).
Sanding Hints
•
Do not apply excessive pressure to the sander. The weight of the sander alone is
sufficient for normal use
•
Always start your sander before it comes into contact with the workpiece, and do
not switch off until it has been lifted off the workpiece.
•
Always use both hands to hold the sander and clamp the workpiece for added
stability and safety.
•
When sanding wood, always sand in the direction of the grain, if you sand across
the grain the sander will leave swirl marks.
Variable speed control
7
Lock on button