Clarke COS200 Kullanım ve Bakım Talimatları - Sayfa 6

Sander Clarke COS200 için çevrimiçi göz atın veya pdf Kullanım ve Bakım Talimatları indirin. Clarke COS200 12 sayfaları. 1/3 sheet orbital sander

ELECTRICAL CONNECTIONS

This product is provided with a standard 13 amp, 230 volt (50Hz), BS 1363 plug, for connection

to a standard, domestic electrical supply. Should the plug need changing at any time,

ensure that a plug of identical specification is used.

This appliance is Doubly Insulated, and the two wires in the mains lead should

be wired up in accordance with the following colour code:

•

Connect the BLUE coloured cord to the plug terminal marked a letter "N"

•

Connect the BROWN coloured cord to the plug terminal marked a letter "L"

If this appliance is fitted with a plug which is moulded on to the electric cable (i.e. non-

rewireable) please note:

The plug must be thrown away if it is cut from the electric cable. There is a danger of

electric shock if it is subsequently inserted into a socket outlet.

Never use the plug without the fuse cover fitted.

Should you wish to replace a detachable fuse carrier, ensure that the correct

replacement is used (as indicated by marking or colour code).

Replacement fuse covers can be obtained from your local dealer or most electrical

stockists.

The fuse in the plug must be replaced with one of the same rating (5 amps) and this

replacement must be ASTA approved to BS1362.

If in doubt, consult a qualified electrician. Do not attempt any electrical repairs yourself.

Do not use an extension longer than 10 metres, with the conductor size at least the same size

as that on the machine.

The sander is provided with a dust extraction facility, where a vacuum extractor may be

connected to the outlet at the rear of the machine. An adapter is provided for this purpose.

Please note however, that this does not preclude the user from wearing a face mask to

prevent the inhalation of dust particles.

It is an EEC requirement that a dust extraction facility be provided on power tools, however,

due to the nature of the tool, some of the dust produced will be forced into the surrounding

atmosphere, and will not be collected.

WARNING

BLUE

NEUTRAL

BROWN

LIVE