Clarke CP150 Kullanım ve Bakım Kılavuzu - Sayfa 6

Sander Clarke CP150 için çevrimiçi göz atın veya pdf Kullanım ve Bakım Kılavuzu indirin. Clarke CP150 17 sayfaları. 150mm (6”) orbital sander/polisher

Sayfayı Yazdır

ELECTRICAL CONNECTIONS

WARNING: READ THESE ELECTRICAL SAFETY INSTRUCTIONS FULLY

BEFORE CONNECTING THE MACHINE TO THE MAINS SUPPLY.

This product is provided with a standard 13 amp, 230 volt (50Hz), BS 1363 plug,

for connection to a standard, domestic electrical supply. Should the plug

need changing, make sure that a plug of identical specification is used.

WARNING: THE WIRES IN THE CABLE ARE COLOURED AS FOLLOWS:

BLUE = NEUTRAL

If the colours of the wires in the power cable do not correspond with the

markings on the terminals of your plug, proceed as follows.

• Connect the blue wire

to the terminal

marked N.

• Connect the brown

wire to the terminal

marked L.

We recommend that this machine is connected to the mains supply via a

Residual Current Device (RCD)

If in doubt, consult a qualified electrician. DO NOT attempt any repairs yourself

This symbol indicates that this is a Class II product and does not

require an earth connection.

EXTENSION CABLES

Always use an approved cable extension suitable for the power rating of this

tool (see specifications), the conductor size should also be at least the same

size as that on the machine, or larger. When using a cable reel, always unwind

the cable completely.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

BROWN = LIVE

Plug must be BS1363/A approved.

Neutral

(Blue)

make sure that the outer sheath of

the cable is firmly held by the clamp

Always fit

a 13 Amp

fuse.

Live

(Brown)