Clarke CP180 Kullanım ve Bakım Talimatları Kılavuzu - Sayfa 3

Sander Clarke CP180 için çevrimiçi göz atın veya pdf Kullanım ve Bakım Talimatları Kılavuzu indirin. Clarke CP180 13 sayfaları. Sander/polisher

Safety Precautions

As with all machinery, there are certain hazards involved with their operation

and use. Exercising respect and caution will considerably lessen the risk of

personal injury. However, if normal safety precautions are overlooked or

ignored, personal injury to the operator or damage to property, may result.

1. ALWAYS Learn the machine's applications, limitations and the

specific potential hazards peculiar to it. Read and become familiar

with the entire operating manual.

2. ALWAYS use a face or dust mask if operation is particularly dusty.

3. ALWAYS check for damage. Before using the machine, any

damaged part, should be checked to ensure that it will operate

properly, and perform its intended function. Check for alignment of

moving parts, breakage of parts, mountings, and any other condition that may

affect the machines' operation. Any damage should be properly repaired or the

part replaced. If in doubt, DO NOT use the machine. Consult your local dealer.

4. ALWAYS disconnect the tool/machine from the power supply before servicing and

when changing accessories.

5. ALWAYS wear safety goggles, manufactured to the latest European Safety Standards.

Everyday eyeglasses do not have impact resistant lenses; they are not safety glasses.

6. ALWAYS keep work area clean. Cluttered areas and

benches invite accidents.

7. ALWAYS ensure that adequate lighting is available. A

minimum intensity of 300 lux should be provided. Ensure

that lighting is placed so that you will not be working in your

own shadow.

8. ALWAYS keep children away. All visitors should be kept a safe

distance from the work area, especially whilst operating the

machine.

9. ALWAYS maintain machine in top condition. Keep tools/machines

clean for the best and safest performance. Follow maintenance

instructions.

10. ALWAYS handle with extreme care. Do not carry the tool/machine by its' electric

cable or yank the cable to disconnect it from the power supply.

11. ALWAYS ensure the switch is off before plugging in to

mains. Avoid accidental starting.

12. ALWAYS concentrate on the job in hand, no matter how

trivial it may seem. Be aware that accidents are caused

by carelessness due to familiarity.

13. ALWAYS keep your proper footing and balance at all

times - don't overreach. For best footing, wear rubber soled footwear. Keep floor

clear of oil, scrap wood, etc.

WARNING:

-3-