Clarke CROS3 Kullanım ve Bakım Talimatları Kılavuzu - Sayfa 12

Sander Clarke CROS3 için çevrimiçi göz atın veya pdf Kullanım ve Bakım Talimatları Kılavuzu indirin. Clarke CROS3 17 sayfaları. Random orbital sander

TROUBLESHOOTING

PROBLEM

Sander is

overheating.

Excessive

Sparking.

Sander does

not operate

when

switched on.

Dust is not

extracted.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

CAUSE

The machine is blocked

with dust.

Worn brushes.

Check to ensure the fuse

in the plug is sound.

The dust bag is full or the

dust extractor flue is

blocked.

REMEDY

Clean the ventilation holes.

Wipe the exterior with a dry cloth.

This problem is easily remedied but

you should consult your CLARKE

dealer for parts and advice.

If the fuse is sound or blows

repeatedly, consult your CLARKE

dealer.

Remove and empty the bag, also

clear any blockage.