Aleko BSW03 Hızlı Başlangıç Kılavuzu - Sayfa 2

Salıncak Seti Aleko BSW03 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Aleko BSW03 3 sayfaları. Dual swing set

Frame Assembly

BEFORE ASSEMBLING: Please read and abide by all Safety Guidelines, and

confirm all necessary parts are included by referencing parts list on page 1.

Step 1. Place together the short curved ends of the Left-Hand Top Leg and Right-

Hand Top Leg and insert into the Top Bar.

Step 2. Place 1 F1 fastener in vertical hole in Top Bar assembly and tighten

securely.

Swing Assembly

Step 1. Completely disassemble S1 U-Bolts then place u-shaped bolt through

the hole in the bearing assembly found at the end of the Swing Ropes.

Step 2. Tighten open-ended S1 nut down onto u-shaped bolt, place 1 S1 washer

on each end of the bolt and insert into Top Bar through 2 sets of vertical holes.

Ensure washer placement between nuts and Top Bar.

Step 3. Place 1 S1 washer on the exposed threaded ends of the S1 bolt, then

attach S1 cap nuts and tighten down. Repeat for both sets of Swing Ropes.