Clarke Woodworker BS1 Kullanım ve Bakım Talimatları - Sayfa 4
Sander Clarke Woodworker BS1 için çevrimiçi göz atın veya pdf Kullanım ve Bakım Talimatları indirin. Clarke Woodworker BS1 4 sayfaları. Belt sander
Ayrıca Clarke Woodworker BS1 için: Kullanım ve Bakım Talimatları Kılavuzu (13 sayfalar)
Sayfayı Yazdır
14. ALWAYS wear proper apparel. Loose clothing or jewellery may
get caught in moving parts. Wear protective hair covering to
contain long hair.
15. ALWAYS use recommended accessories. The use of improper
accessories could be hazardous.
16. ALWAYS remove plug from electrical outlet when adjusting,
changing parts, or working on the machine.
17. NEVER operate machine while under the influence of drugs, alcohol or any medication.
18. NEVER leave machine running unattended. Turn power off. Do not leave the
machine until it comes to a complete stop.
19. NEVER force the machine. It will do a better and safer job at the
rate for which it was designed.
20. NEVER use power tools in damp or wet locations or expose them
to rain. Keep your work area well illuminated. Do not use in explosive
atmosphere (around paint, flammable liquids etc.). Avoid
dangerous environment.
ADDITIONAL PRECAUTIONS FOR BELT SANDERS
1.
Always wear ear protectors/defenders, as the noise level of this machine can exceed
85dB (A).
2.
Ensure the Dust Collection Bag is attached before use. Empty dust frequently.
3.
Do not use the machine if the electric cable, plug or the motor, is in poor condition.
4.
Keep the mains cable well away from the sander, and ensure an adequate electrical
supply is close at hand so that the operation is not restricted by the length of the
cable.
5.
Switch the machine OFF immediately the task is completed.
6.
Never allow the ventilation slots in the machine to become blocked.
7.
Always use the appropriate sanding medium for the material being worked. Wood
sanding media of various grades is available from your Clarke dealer, (see accessories)
8.
Do not attempt any electrical repair yourself. Consult a qualified electrician, or our
020 8988 7400
Service Dep't on
Additionally, please keep these instructions in a safe place for future reference.
4
ELECTRICAL CONNECTIONS
This product is provided with a standard 13 amp, 230 volt (50Hz), BS 1363 plug, for connection
to a standard, domestic electrical supply. Should the plug need changing at any time,
ensure that a plug of identical specification is used.
This appliance is Doubly Insulated, and the two wires in the mains lead should
be wired up in accordance with the following colour code:
BLUE
BROWN
•
Connect the BLUE coloured cord to the plug terminal marked a letter "N"
•
Connect the BROWN coloured cord to the plug terminal marked a letter "L"
If this appliance is fitted with a plug which is moulded on to the electric cable (i.e. non-
rewireable) please note:
1.
The plug must be thrown away if it is cut from the electric cable. There is a danger of
electric shock if it is subsequently inserted into a socket outlet.
2.
Never use the plug without the fuse cover fitted.
3.
Should you wish to replace a detachable fuse carrier, ensure that the correct
replacement is used (as indicated by marking or colour code).
4.
Replacement fuse covers can be obtained from your local dealer or most electrical
stockists.
FUSE RATING
The fuse in the plug must be replaced with one of the same rating (13 amps) and this
replacement must be ASTA approved to BS1362.
If in doubt, consult a qualified electrician. Do not attempt any electrical repairs yourself.
CABLE EXTENSION.
Do not use an extension longer than 10 metres, with the conductor size at least the same size
as that on the machine.
DUST EXTRACTION
The sander is provided with a dust collection bag, which should always be in place. This
does not preclude the user from wearing a face mask to prevent the inhalation of dust
particles.
Although a dust collection facility is provided, due to the nature of the tool, some of the
dust produced will be forced into the surrounding atmosphere, and will not be collected.
WARNING
-
NEUTRAL
-
LIVE
5