Directed Electronics 2000 MAX Kullanıcı El Kitabı - Sayfa 6
Araba Alarmı Directed Electronics 2000 MAX için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Directed Electronics 2000 MAX 10 sayfaları. Recreationnal vehicle security system
Sayfayı Yazdır
Disarming without a transmitter
This feature allows you to disarm the security system without the remote
transmitter should it be lost, damaged or disabled. In order to disarm the
system without the transmitter, you must have the vehicle's ignition key and
know where the Valet button is located.
To disarm the security system, turn the ignition to the "ON" position. Press
the Valet button the preset number of times (one to five times) within 15
seconds. After 5 seconds, the system will now disarm. If the system does not
disarm, you may have waited too long; turn the ignition "OFF" and "ON" and
try again
Location of the Valet button : ______________________________
Number of pulses : _______________________
Valet Mode
You can prevent your security system from automatically arming and trig-
gered by using the Valet Mode. This is very useful when washing the
recreationnal vehicle or having it serviced. In Valet mode, the security system
will not arm, even with the remote transmitter.
To enter or exit Valet mode :
You are now in Valet mode , to exit Valet mode repeat step 1 thru 3 again.
Auxiliary function
Press on buttons
optionnal 508 D Microwave perimeter sensor.
4
1.
Turn the ignition "ON"
2.
Turn the ignition "OFF"
3.
Press and release the Valet button within 10 seconds.
and
together for 2.5 seconds, this will activate
2002 Directed Electronics, (Canada). Inc.