Clarke Woodworker CDS300 Kullanım ve Bakım Kılavuzu - Sayfa 4
Sander Clarke Woodworker CDS300 için çevrimiçi göz atın veya pdf Kullanım ve Bakım Kılavuzu indirin. Clarke Woodworker CDS300 12 sayfaları. 300mm disc sander
GENERAL SAFETY RULES FOR OPERATING MACHINERY
As with all machinery, there are certain hazards involved with
their operation and use. Exercising respect and caution will
considerably lessen the risk of personal injury. However, if normal
safety precautions are overlooked or ignored, personal injury to
the operator or damage to property, may result.
1. READ and BECOME FAMILIAR with the entire operating manual. Learn
the machines' applications and limitations as well as the specific
potential hazards peculiar to it.
2. EARTH ALL MACHINES. If the machine is equipped with three-pin plug,
it should be plugged into a three-pin electrical socket. Never remove
the earth pin.
3. ALWAYS ensure that ADEQUATE LIGHTING is available. A minimum
intensity of 300 lux should be provided. Ensure that lighting is placed
so that you will not be working in your own shadow.
4. CHECK for DAMAGE before using the machine. Any damaged part,
such as a guard etc., should be checked to ensure that it will operate
properly, and perform its intended function. Check for alignment of
moving parts, breakage of parts, mountings, and any other condition
that may affect the machines' operation. Any damage should be
properly repaired or the part replaced. If in doubt, DO NOT USE the
machine. Consult your local dealer.
5. DISCONNECT the MACHINE from the power supply before servicing
and when changing sanding discs, or adjusting the table etc.
6. ALWAYS KEEP GUARDS IN PLACE and in working order.
7. ALWAYS WEAR SAFETY GOGGLES, manufactured to the latest European
Safety Standards. Also use a face or dust mask if the cutting operation
is dusty. Everyday eyeglasses do not have impact resistant lenses, they
are NOT safety glasses.
8. KEEP WORK AREA CLEAN. Cluttered areas and benches invite
accidents.
9. ALWAYS WEAR EAR PROTECTORS/DEFENDERS.
10. DON'T FORCE THE MACHINE. It will do a better and safer job at the rate
for which it was designed.
WARNING:
4