Alemite 7735 Servis Kılavuzu
Su Pompası Alemite 7735 için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. Alemite 7735 14 sayfaları. Medium-pressure bulk grease pump
Sayfayı Yazdır
Medium-Pressure Bulk Grease Pump
Description
The major components of pump model 7735 consist of an air-
operated motor and a pump tube. The air motor connects directly
to the double-acting reciprocating pump tube.
This medium-pressure (10:1 ratio) grease pump is designed to
transfer a range of greases [up to NLGI # 3] from their original
bulk containers to smaller containers.
Mounting
In most cases these pumps connect horizontally to a bulk
container. See Figure 5. The pump includes the male portion of a
3-inch camlock connection for ease in installation.
Material Delivery Hose and Control Valve
The use of the proper size delivery hose and control valve (if
used) is essential to optimize flow rate. A hose that is excessively
long or with too small an inside diameter will restrict product
flow.
Both components must have a pressure rating that allows safe
operation at the maximum anticipated pump pressure.
Air Motor
Piston Diameter x Stroke
Inches
Centimeters
4-1/4 x 4
10.8 x 10.2
For information on the air motor, refer to Service Guide SER 323440-4
Pump Tube
Max. Material
Pressure
Material
Outlet
psi
Bars
3/4 " NPTF (f)
1500
103.5
* For detailed information, refer to Figure 3
Table 1 7735 Model Series Specifications
This document contains confidential information that is the property of Alemite Corporation
670698
and is not to be copied, used, or disclosed to others without express written permission.
Service Guide
Max. Air Pressure
Air Inlet / Outlet
psi
3/4 " NPTF (f)
150
Max. Delivery/Minute
Displacement
(Approximate)*
per Cycle
3
Pounds
Kilograms
in
73
33
9.2
Alemite Corporation
167 Roweland Drive, Johnson City, Tennessee 37601
www.alemite.com
©
Copyright
2003 by Alemite Corporation
Bars
10.3
3
cm
150.8
Figure 1 Medium-Pressure Bulk Grease Pump
7735
Model 7735
SER 7735
Revision 6-03