Alemite 7886-S5 Servis Kılavuzu
Su Pompası Alemite 7886-S5 için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. Alemite 7886-S5 14 sayfaları. Medium-pressure stainless material pump
Sayfayı Yazdır
Medium-Pressure Stainless Material Pump
Description
NOTE: The components within the fluid-wetted path of
this pump are stainless steel and Teflon.
This pump is tested in mineral oil. Flush the pump thor-
oughly with a solvent compatible with the product dis-
pensed as required.
The major components of pump model 7886-S5 consist of a
reciprocating air motor and a double-acting pump tube. The pump
tube is divorced from the motor which:
• protects the motor from product contamination
• allows separation without product leakage
The pump tube is designed to enable the delivery of a variety of
materials. This medium-pressure (11:1) pump contains a bung
adapter [2 " NPTF (m)] that allows operation directly from original
55-gallon (200/205 l) drums.
Specifications
Air Motor
Piston Diameter / Stroke
Inches
Centimeters
4-1/4 / 4
10.8 / 10.2
For air motor data, refer to Service Guide SER 323440-4
See Figure 2 for performance curves.
Pump Tube
Maximum
Max. Free-Flow
Material
Delivery/Minute *
Material
Pressure
Outlet
psi Bars Gallons
1 " NPTF (f) 2200 152
13
See Figure 2 for performance curves.
* SAE 10 oil at 75 ° F (24 ° C) and 100 psi [6.9 Bars] air pressure.
Table 1 Pump Model 7886-S Specifications
This document contains confidential information that is the property of Alemite Corporation
670751
and is not to be copied, used, or disclosed to others without express written permission.
Service Guide
CAUTION
Max. Air Pressure
Air Inlet/Outlet
psi
3/4 " NPTF (f)
200
Recommended
Continuous
Delivery/Minute
Liters
Gallons Liters
49.2
7.75
29.3
Alemite Corporation
PO Box 473515, Charlotte, North Carolina 28247-3515
www.alemite.com
©
Copyright
Bars
14
Displacement
per Cycle
3
3
In
Cm
9.62
157.6
Figure 1 Medium-Pressure Stainless Pump
2000 by Alemite Corporation
7886-S5
Model 7886-S5
SER 7886-S5
Revision (8-00)