Directed Electronics Viper Kullanıcı El Kitabı - Sayfa 19

Araba Alarmı Directed Electronics Viper için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Directed Electronics Viper 20 sayfaları. Security and remote start

Sayfayı Yazdır

Directed Electronics Viper Kullanıcı El Kitabı

Out of Range Notification

If a command is issued from the remote, but the remote is beyond the

range of the vehicle to receive the command, the remote will respond

with an Out of Range notification. If this occurs, the remote will emit a

harsh tone and the out of range indicator will appear.

Since conditions will vary in different areas (ie: Weather, RF interfer-

ence, etc) range may be affected and require you to be closer to the

vehicle for successful transmission.

➤ System maintenance

The system requires no specific maintenance. Your One way remote is

approximately one year under normal use. The 1-way remote uses one

CR2032 cell battery. The 2-way remote contains a non-replaceable

rechargeable battery. When the battery begins to weaken, the operat-

ing range will be reduced.

➤ Charging the Battery

•

Plug in the USB charger (alternately a standard mini USB cable

connected to any standard USB port on any laptop or desktop

computer can also be used (cable not included)).

•

The LCD displays "CHARGE" while the battery level bars within

the battery icon flash, displaying the current charge level as the

battery charges.

•

When charging is complete the LCD then displays "FULL".

Note:

If the battery has been severely discharged all remote functions

are disabled for a short charge period. The battery status outline flashes