Alemite 7338-C Servis Kılavuzu - Sayfa 10

Araçlar Alemite 7338-C için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. Alemite 7338-C 12 sayfaları. Severe-duty welding hose reel

SER 7338-C

Reel Operation

WARNING

Do not exceed the lowest pressure rating

of any component in the system.

Heed the Warnings within the manual(s) enclosed

with all welding equipment. For example, bleed all

hoses when not in use for 30 minutes.

Ensure all components are in operable condition.

Replace any suspect parts prior to operation. Per-

sonal injury can occur.

Hold the delivery hose securely until the reel is

securely latched or fully retracted. Uncontrolled

retraction can result in personal injury.

Latch Lockout

Do not extend the hose from the reel too rapidly. Too

much velocity can cause the reel to over-run and latch. If

this occurs, pulling on the hose will not release the latch

mechanism.

Should the reel latch in this condition, it will be

necessary to have an assistant maintain tension on the hose

while the latching mechanism is manually released.

Revision (12-07)

Severe-Duty Welding Hose Reel

WARNING

The reel is under maximum spring tension.

Personal injury can occur.

1. Instruct the assistant to grip the hose securely with

both hands to prevent uncontrolled retraction.

2. Grip the Sheave Assembly securely with gloved hands.

• Gloves should be non-slip.

3. Turn the Sheave Assembly in the direction just enough

that allows Pawl (23) to be free of tension from the

ratchet on Power Spring Assembly (26).

• This direction further increases tension on the power

spring.

4. While maintaining the position of the Sheave assembly

with one hand, move the Pawl away from the ratchet.

• Use a screwdriver or other suitable tool.

5. Instruct the assistant to allow the hose to retract slowly

onto the Sheave Assembly.

Alemite Corporation