Clarke PSE1A Kullanım ve Bakım Talimatları Kılavuzu - Sayfa 8

Su Pompası Clarke PSE1A için çevrimiçi göz atın veya pdf Kullanım ve Bakım Talimatları Kılavuzu indirin. Clarke PSE1A 11 sayfaları. Clean water pump

PREPARATION

CONNECTING THE MULTI HOSE ADAPTOR

DISCONNECTED THE PUMP FROM THE MAINS POWER SUPPLY BEFORE

CONNECTING THE MULTI HOSE ADAPTOR

An Elbow is provided with a 1-1/4"BSP thread at

either end as shown in the diagram opposite.

Ensure the end fitted with an O-Ring is screwed

into the pump.

Screwed on to the other end of the elbow, is a

multi hose connector capable of accepting 1",

3/4" or 1/2" hoses. Simply cut the multi hose

connector to the required size and attach a

suitable hose using with a worm drive clip.

For maximum efficiency, we strongly

recommend that you connect a 1" diameter hose to the multi hose adapter,

Alternatively, you may remove the multi adapter altogether, and screw on a 1-1/4"

BSP hose adapter

The pump is completely submersible, and should be placed in a vertical position, on a

solid flat surface, Placing the pump on a couple of house bricks if required.

SUITABLE HOSES, and SPARE/REPLACEMENT MULTI HOSE ADAPTERS ARE

AVAILABLE FROM YOUR CLARKE DEALER

WARNING!

Multi Hose

Connector

Elbow