Alemite 3644-C2 Kısa Kılavuz - Sayfa 4

Ölçüm Cihazları Alemite 3644-C2 için çevrimiçi göz atın veya pdf Kısa Kılavuz indirin. Alemite 3644-C2 5 sayfaları. Preset batch meter

Sayfayı Yazdır
METER is ready to start dispensing
in AUTO mode (see paragraph C).
Selecting a PRESET
value of frequent use.
METER stores:
AUTO
last:
the last PRESET value used
AUTO
1-2-3-4-5:
five different PRESET values of
frequent use.
If the unit is off, type RESET to re-start it.
The METER displays:
Last amount dispensed.
Non-resettable total.
Press AUTO.
The METER displays the
PRESET value stored in
AUTO LAST.
PRESET value.
Blinking
message AUTO LAST.
Press AUTO again. The
METER displays the PRESET
value stored in AUTO 1.
4
1-800-548-1191 - http://www.partdeal.com - [email protected]
PRESET value.
Blinking
message AUTO 1.
To display the other stored
values, press AUTO as many
times as necessary to reach
the desired values.
Blinking message
will be:
To confirm a PRESET
value press and hold
down the AUTO key
until the METER
displays:
Reset Batch Total.
AUTO message
Not blinking.
METER is ready to start dispensing
in AUTO mode (see paragraph C).
Selected value.