Directed Electronics 550.6 Kullanıcı El Kitabı - Sayfa 15
Amplifikatör Directed Electronics 550.6 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Directed Electronics 550.6 16 sayfaları. Directed electronics, inc power amplifier owner's manual
Sayfayı Yazdır
SPECIFICATIONS
RMS continuous power per channel, Channels 1-4 driven
into 4 ohms from 20 to 20,000 Hz, with less than 0.08%
total Harmonic Distortion @ 14.4 VDC. Channel 5-6
driven into 4 ohms from 20-250 Hz, with less than
0.08% THD @ 14.4 VDC.
RMS continuous power per channel, Channels 1-4 driven
into 2 ohms from 20 to 20,000 Hz, with less than 0.1%
Total Harmonic Distortion @ 14.4 VDC. Channel 5-6
driven into 2 ohms from 20-250 Hz, with less than 0.1%
THD @ 14.4 VDC.
RMS continuous power, 3-channel operation, channels 1-
4 bridged into 4 ohms from 20 to 20,000 Hz, with less
than 0.1% Total Harmonic Distortion @ 14.4 VDC.
Channel 5-6 bridged into 4 ohms from 20-250 Hz, with
less than 0.1% THD @ 14.4 VDC.
Dynamic power rating (IHF-202 Standard) at minimum
load
Signal-to-Noise Ratio
Frequency Response
Damping Factor @ 4 ohm
Crossovers
Bass Equalization (Ch 5-6)
Input Impedance
Input Sensitivity
Output Impedance (ch 1-6)
Supply Voltage
Fusing and Power
Minimum Cable Requirements (AWG)
(Per amp, trunk mounted)
© 2002 Directed Electronics, Inc
Viper model 550.6
Ch 1-4 Ch 5-6
50
75
watts
watts
75
125
watts
watts
150
2
250
x
watts
watts
700 watts
Greater than 95 dB
20-20,000 Hz ± 0.5 dB
Greater than 100
Switchable high or low pass
12 dB/octave, continuously
variable 50 to 500 Hz
Variable, centered at 40Hz
20K ohms
Variable from 150 mV to 8 volt
2 to 8 ohms, stereo
4 to 8 ohms, bridged
10 to 16 VDC
60A
#8
15