Directed Electronics SIR-PVK1 Kurulum Kılavuzu - Sayfa 8

Otomobil Elektroniği Directed Electronics SIR-PVK1 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Directed Electronics SIR-PVK1 16 sayfaları. Sirius satellite radio professional vehicle install kit

Sayfayı Yazdır

IMPORTANT PRE-INSTALLATION NOTES

Directed Electronics recommends that you have this prod-

uct professionally installed.

Read this entire installation manual as well as the owner's

guide provide with your Sirius radio before proceeding with

the installation.

If the installation notes in this manual are not followed,

it may result in personal injury or damage to the various

components of the Sirius radio, damage to the vehicle's

audio/visual systems, damage to the vehicle's electrical

systems, or damage to the vehicle's mechanical systems.

Familiarize yourself with the existing audio/video system

in the vehicle by consulting the owner's manuals for these

systems before making any wire or cable connections to

those systems.

The Dual Voltage Power Adapter is designed for 12 volt DC

negative ground, vehicle electrical systems only.

When faced with a blown fuse, always determine the cause

and correct the problem before replacing the fuse and be

sure to use a replacement fuse of the same type, rating and

amperage.

Do not cut any of the wires and cables included with the

Professional Vehicle Install Kit or the Sirius radio being

installed. Any excess cable or wire length should be neatly

bundled or coiled, and secured in

Do not route wires or cables across sharp edges, or

through holes which could result in the wire or cable be-

coming damaged, chafed, cut, or shorted. If routing across

sharp edges is unavoidable, use the provided Expandable

sleeve to protect the wires. Use rubber grommets when

routing through holes. Make sure to route all wires away

from any moving parts that may damage them.

Avoid pinching, squashing, kinking, or crimping any of the

wires used in this install or any of the vehicle's existing

wires/cables during the installation.

Refer to the owner's guide for your Sirius radio to deter-

mine the voltage required in order to select correct plug to

be used for the output of the Dual Voltage Power Adapter.

The plugs provided with thise installation kit are designed

to fit Sirius-branded radios that operate on either 5V or 12V

DC. They are keyed and sized to prevent inadvertent con-

nection to radios of incorrect voltage rating. Do not force

the coaxial output connector into the cradle of your Sirius

radio. If the connector does not appear to fit, stop and

make sure you have selected the correct output harness to

match your radio's voltage rating.