alphatronics SL-19 DSB-IH Kullanım Kılavuzu - Sayfa 8

LED TV alphatronics SL-19 DSB-IH için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. alphatronics SL-19 DSB-IH 15 sayfaları.

Initial operation Kathrein Antenna HDP 750, CAP 650, CAP 900

Before initial operation of the alphatronics device with the KATHREIN antenna,

the following requirements should be met:

Sufficiently thick cables leading from the battery or the EBL to the Kathrein antenna.

The TV is not to be connected to these lines and requires a different circuit.

If possible, compare the wiring to the image shown below.

The SAT-cable with the red marking (master coax) is connected to the TV.

A second SAT-cable is included for further TV set.

STROMVERSORGUNGS-

KABEL

SAT-ANLAGE

SLAVE-

KOAXKABEL

TV 2

TV-GERÄT 2 MIT INTEGRIERTEM SAT-TUNER

oder

SAT-RECEIVER, Z.B. UFS 946/CI+

12 V

ZÜNDUNG

MASTER-

KOAXKABEL

TV 1

ENGLISH

Connection panel rear of TV:

A connecting line between the CAP-converter and the SAT-socket of the TV set has already

been pre-assembled.

The marked SAT-cable from the Kathrein antenna is attached to the free angle socket.

If the device is to be connected to a normal domestic system or another SAT-cable that does

not support the KATHREIN antenna functions, then the side angle socket can be unscrewed.

The power supply plug is pushed underneath the connecting cable and inserted into the side

DC socket.

12 V=

BORDNETZ

Notes:

Wi-Fi data, is displayed on the white sticker, in the case of using the optional

KATHREIN streaming sticks which are connected to the USB socket of the CAP-converter.

This sticker must not be removed.