CTEK D250S Dual Kullanıcı Kılavuzu - Sayfa 3

Otomobil Aksesuarları CTEK D250S Dual için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. CTEK D250S Dual 8 sayfaları. Dc/dc ic recorder
Ayrıca CTEK D250S Dual için: Kullanıcı Kılavuzu (15 sayfalar), Kullanım Kılavuzu (13 sayfalar), Kullanıcı Kılavuzu (12 sayfalar)

Sayfayı Yazdır

INSTAllINg ThE ChARgER IN ThE VEhIClE

Install the charger on a surface where it can be properly fixed and where the charger is not exposed

to fuels, oils or splashes of dirt. Mount the charger with screws intended for the surface and attach

it with one screw in each of the four holes in the corners of the charger. See picture 1. Mount the

charger with M4 or ST4.2 screws with maximum torque of 2Nm.

Target battery –

Supply source –

Target battery +

Supply source +

M4 or ST4.2

Temperature

sensor

Max torque 2Nm

Picture 1

WARNINg

Due to high risk of short circuit, batteries should not be connected to power cords when installing

the charger.