Acorn DC-360 Kullanım Kılavuzu - Sayfa 10

Fan Acorn DC-360 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Acorn DC-360 16 sayfaları.

HANGING OF FAN:

3) Install back the cross pin, nut and secured with the 'R' pin. The 'R' pin

must be properly installed to prevent the cross pin from working loose.

Tighten the screws on the coupler through the downrod. Tighten the two

setscrew on the coupler (fig 11).

WIRING OF FAN:

1) Connect the motor wires, receiver wires and AC wires, follow step

'WIRING OF FAN' on page 7.

1) Remove the 'R' pin, nut and

cross pin from the coupler

on the hanger bracket.

2) Thread the wires through

the coupler and insert the

downrod into the coupler

(fig 11).

fig 11

fig 12