Clarke CAT32B Kullanım ve Bakım Talimatları Kılavuzu - Sayfa 8
Testere Clarke CAT32B için çevrimiçi göz atın veya pdf Kullanım ve Bakım Talimatları Kılavuzu indirin. Clarke CAT32B 16 sayfaları. High speed sabre saw
Ayrıca Clarke CAT32B için: Kullanım ve Bakım Talimatları (16 sayfalar)
Sayfayı Yazdır
ASSEMBLY
INSTALLING THE BLADE
1. Slide the blade into the saw as
shown.
2. Remove the protective cover by
undoing the screw shown.
3. Secure the blade by tightening
the two hex screws using the hex
key supplied.
CONNECTING THE AIR SUPPLY
WARNING: COMPRESSED AIR CAN BE DANGEROUS. ENSURE THAT YOU
ARE FAMILIAR WITH ALL PRECAUTIONS RELATING TO THE USE OF
COMPRESSORS AND COMPRESSED AIR SUPPLIES.
Note: Ensure the compressor is turned off.
1. Remove the plastic blanking plug
from the connection port of the
tool.
2. Pour 2-3 drops of CLARKE airline oil
into the air inlet. This should be
done regardless of whether or not
a lubricated air supply is to be
used.
3. Connect a suitable hose to the
tool as shown.
4. Connect the other end of the
hose to the compressor. (A whip hose with a quick fit coupling is available
from your CLARKE dealer).
5. Turn on the air supply and check for air leaks. Rectify any found before
proceeding. The tool is now ready for use.
Parts & Service: 020 8988 7400/E-mail:[email protected] or [email protected]
8
SECURING SCREW
BLANKING
PLUG