Clarke CRS350M Kullanım ve Bakım Talimatları Kılavuzu - Sayfa 5

Testere Clarke CRS350M için çevrimiçi göz atın veya pdf Kullanım ve Bakım Talimatları Kılavuzu indirin. Clarke CRS350M 13 sayfaları. Mini reciprocating saw

Sayfayı Yazdır

5) SERVICE

a. Have your power tool serviced by a qualified repair person using only identical

replacement parts. This will ensure that the safety of the power tool is

maintained.

ADDITIONAL WARNINGS FOR RECIPROCATING

SAWS

1. ALWAYS use the appropriate blade for the material being cut.

2. ONLY sharp saw blades in perfect working condition should be used; cracked or

bent saw blades should be discarded and replaced at once.

3. ENSURE that the saw blade is securely fixed.

4. ALWAYS use a cooling agent when cutting metals, i.e. cutting/soluble oil.

5. When cutting wood, ensure all nails have been removed beforehand. Nails will

damage the wood saw blade.

6. ALWAYS keep the mains cable well away from the machine and ensure an

adequate electrical supply is close at hand so that the operation is not restricted by

the length of the cable.

7. ALWAYS allow sufficient clearance beneath the work to ensure the blade does not

come into contact with the floor, table etc.

8. ALWAYS check for hidden electrical wires or water pipes etc.

9. NEVER allow the ventilation slots in the machine to become blocked.

10. DO NOT cut material above the specified thickness.

11. DO NOT cut through walls or cavities before checking for hidden electrical wires or

water pipes etc.

12. DO NOT touch the blade immediately after use, allow time for it to cool.

13. NEVER attempt to stop the saw blade with your fingers.

14. NEVER put the saw down on a table or work bench unless switched off. The saw

blade will keep running briefly after the tool has been switched off.

15. Wherever possible, use clamps and vices to fasten the workpiece securely.

16. Do not attempt to saw extremely small workpieces.

17. ALWAYS hold the saw with both hands.

ENVIRONMENTAL PROTECTION

Recycle unwanted materials instead of disposing of them as waste. All tools,

accessories and packaging should be sorted, taken to a recycling centre

and disposed of in a manner which is compatible with the environment.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]