Clarke WoodWorker CCS1 Kullanım ve Bakım Talimatları - Sayfa 9

Testere Clarke WoodWorker CCS1 için çevrimiçi göz atın veya pdf Kullanım ve Bakım Talimatları indirin. Clarke WoodWorker CCS1 12 sayfaları. 185mm circular saw

Sayfayı Yazdır

DUST EXTRACTION

The Saw is provided with a dust extraction facility, where a dust bag or vacuum extractor

may be connected to the right hand side of the machine. Please note however, that this

does not preclude the user from wearing a face mask to prevent the inhalation of dust

particles.

It is an EEC requirement that a dust extraction facility be provided on power tools, however,

due to the nature of the tool, some of the dust produced will be forced into the surrounding

atmosphere, and will not be collected.

Maintenance

Always inspect the tool before use, and ensure it is in top condition.

Ensure all air vents are clear, (use compressed air to clean the machine where possible).

Check the power cable to ensure it is sound and free from cracks, bare wires etc. avoid

using solvents when cleaning plastic parts, most plastics are susceptible to damage from

the various types of commercial solvents.

All bearings etc, in this tool are lubricated with a sufficient amount of high grade lubricant

for the tools lifetime under normal operating conditions, therefore no further lubrication is

required.

Trouble Shooting

Saw is overheating

This indicates the machine is dirty. Clean the ventilation holes, and blow out with compressed

air or clean with a dry cloth.

Overloading the machine will also cause overheating. Do not use for heavy duty work, and

do not apply excessive pressure.

Excessive sparking occurs

This indicates worn brushes. This problem is quickly remedied but you should consult your

CLARKE dealer for parts and advice.

Saw does not operate when switched ON

Check to ensure the fuse is sound and replace if necessary. If the fuse is sound or blows

repeatedly, consult your CLARKE dealer.

Accessories

A wide range of accessories is available from your nearest CLARKE dealer, for further

information, contact your nearest dealer, or telephone CLARKE International Sales

department on 01992 565300.